Installing Or Replacing Dimms; Figure 30 Replacing The Front Bezel - Nortel Contivity 2600 Install Manual

92 Chapter 5 Nortel VPN Router 1750 option installation
11 Replace the front bezel

Figure 30 Replacing the front bezel

Installing or replacing DIMMs

The VPN Router 1750 has two slots for dual inline memory modules (DIMM)
(Figure 27 on page
VPN Router 1750 with one 128 MB DIMM installed. To upgrade memory in the
gateway, install a second 128 MB DIMM.
NN46110-317 02.01
a
Set the VPN Router 1750 on the rack-mount shelf in the rack.
b Insert one of the panhead screws through the bottom hole on each side of
the shelf into the hole in the rack, and tighten the screws.
a
Hold the bezel by the two handles, and push it onto the chassis.
b Use a screwdriver to tighten the two screws that secure the bezel to the
chassis.
Press here
86). Unless you ordered additional memory, Nortel ships the
(Figure 30).
CS260005E