Figure 44 Replacing The Front Bezel; Installing Or Replacing Dimms - Nortel Contivity 2600 Install Manual

124 Chapter 7 Nortel VPN Router 2750 option installation
10 To install the VPN Router 2750 in an equipment rack, do the following:
11 Replace the front bezel

Figure 44 Replacing the front bezel

Installing or replacing DIMMs

The VPN Router 2750 has two slots for dual inline memory modules (DIMM)
(Figure 41 on page
VPN Router 2750 with one 256 MB DIMM installed. To upgrade memory in the
gateway, install a second 256 MB DIMM.
NN46110-317 02.01
a
Set the VPN Router 2750 on the rack-mount shelf in the rack.
b Insert one of the panhead screws through the bottom hole on each side of
the shelf into the hole in the rack, and tighten the screws.
a
Hold the bezel by the two handles, and push it onto the chassis.
b Use a screwdriver to tighten the two screws that secure the bezel to the
chassis.
Press here
118). Unless you ordered additional memory, Nortel ships the
(Figure 44).
CS260005E