Chapter 2
Cabling the VPN Router and turning the power on
This chapter provides information about how to connect communications cables
and the power cord to the VPN Router 600.
This chapter contains the following topics:
Topic
Connecting communications cables VPN Router 600
Connecting the power cord
Understanding the LEDs
Caution: Connect the cables to the built-in Ethernet ports and to the
interfaces on the optional interface card installed in the VPN Router 600
before you plug the power cord into the outlet.
Caution: Route the cable for all WAN, LAN, and serial connections
inside the building environment.
Nortel VPN Router Installation — VPN Router 600
29
Page
30
32
33