196 Appendix A Technical specifications
T1/E1 CSU/DSU WAN interface card
The T1/E1 CSU/DSU WAN interface card has a single connector that provides
the signals needed to interface to T1 or E1 equipment. Nortel ships this interface
card as a half-height card and as a full-height card.
Figure 90
VPN Routers other than the VPN Router 1100.
Figure 90 T1/E1 CSU/DSU WAN interface card (half-height card)
Figure 91
VPN Routers other than the VPN Router 1100.
Figure 91 T1/E1 CSU/DSU WAN interface card (full-height card)
Figure 92
1100.
Figure 92 T1/E1 CSU/DSU WAN interface card (for the VPN Router 1100)
NN46110-317 02.01
shows the T1/E1 CSU/DSU WAN interface card (half-height card) for
Note: For E1 service, you must install the half-height version of the
T1/E1 CSU/DSU WAN interface card.
shows the T1/E1 CSU/DSU WAN interface card (full-height card) for
shows the T1/E1 CSU/DSU WAN interface card for the VPN Router
CS160012A
CS160012A