Figure 32 Removing The Front Bezel; Removing The Front Bezel And Top Cover - Nortel Contivity 2600 Install Manual

Removing the front bezel and top cover

To install option cards or DIMMs, you must remove the front bezel and the top
cover from the gateway.
To remove the front bezel:
1
2

Figure 32 Removing the front bezel

3
Chapter 6 Nortel VPN Router 2700 and 2600 option installation 99
Shut down the VPN Router 2700 or 2600 using the Web GUI or the CLI, and
then unplug it as described in
hardware" on page 98.
Warning: Risk of electric shock
Turn off the gateway and unplug the power cord before you attempt to
remove or install an option card or DIMM.
Use a Phillips screwdriver to turn each of the two screws on the front bezel a
quarter turn counterclockwise
Grip the two handles and firmly pull the bezel toward you to unsnap it from
the chassis.
Caution: Risk of equipment damage
Do not use the piece with the Nortel logo and the LEDs as a handle.
"Shutting down the system to add or replace
(Figure 32).
Nortel VPN Router Installation — Hardware Options
CS260015B