Replacing A Power Supply; Figure 50 Installing Nortel Vpn Router 4600 Dimms - Nortel Contivity 2600 Install Manual

138 Chapter 8 Nortel VPN Router 4600 option installation

Figure 50 Installing Nortel VPN Router 4600 DIMMs

10 Pull up the locking levers on both sides of the next available DIMM.
11 Snap the DIMM into the socket.
12 Replace the support bracket by tightening the two secured captive screws and
13 Push in the slide-out tray.
14 Tighten the thumbscrews.

Replacing a power supply

To remove the power supply:
1
2
NN46110-317 02.01
Alignment
Keys
the rear Phillips screw.
Remove the front bezel as shown in
Use a flat-head screwdriver to unscrew the top and bottom power supply
screws, as shown in Figure 51 on page
1
2
2
3
4
Locking lever
Figure 46 on page
139.
CS460009A
131.