Removing The Front Bezel And Top Cover; Figure 10 Removing The Front Bezel - Nortel Contivity 2600 Install Manual

Removing the front bezel and top cover

To install option cards or DIMMs, you must remove the front bezel and the top
cover from the gateway.
To remove the front bezel:
1
2

Figure 10 Removing the front bezel

Chapter 3 Nortel VPN Router 1700 and 1600 option installation 51
Shut down the VPN Router 1600 or 1700 using the Web GUI or the CLI and
then unplug it as described in
hardware" on page 50.
Warning: Risk of electric shock
Shut down the gateway before you attempt to add or replace an option
card.
Use a Phillips screwdriver to turn each of the two screws on the front bezel a
quarter turn counterclockwise
"Shutting down the system to add or replace
(Figure 10).
Nortel VPN Router Installation — Hardware Options
CS160014A