Ricoh IM 550F Field Service Manual page 38

Overview
The following Program/Change Administrator screen appears at the first power-up.
When the customers set the administrator/supervisor login password, the screen disappears and the
home display appears. The customer, however, can make this screen disappear with the following
procedure if there is no need to set the password.
On the Program/Change Administrator screen, press [Change] next to Supervisor and then press
1.
[OK] without entering any password.
Press [OK] again when the Confirm password display appears.
2.
For Administrator 1, perform the same procedure as steps 1 and 2.
3.
Press [OK].
4.
The home display appears.
Turn OFF/ON the main power.
5.
SP5-755-002 hides the administrator password input screen temporarily and continue the installation
procedure without setting an administrator password. However, the Program/Change Administrator
screen will appear every time you turn OFF/ON the main power if the password is not set.
Password Setting Procedure
•
For more details about this security issue, see "Notes on Using Multi-Function Printers Safely"
supplied with the MFP.
•
When Supervisor / Administrator 1-4 passwords are configured via network, the "Change
Supervisor login password" window will not be displayed.
•
The passwords for Supervisor or Administrator 1 to 4 can be set via "System Settings".
However, the Program/Change Administrator screen will appear every time the main power is
turned ON if the passwords are set this way. We recommend that customers set the
passwords via the network or the Program/Change Administrator screen.
Install the MFP.
1.
Turn ON the main power.
2.
2.Installation
27