connect the two cables of the HDD to the controller board [A].
•
When reattaching the controller box [A], make sure to secure the harness and flat cable to
the harness guides, as shown below.
•
When reattaching the bracket [A] of the controller box [B], do not interpose harness and
flat cable between bracket and controller box.
After Installing the HDD
Connect the power cord and turn ON the main power.
1.
The message "Hard Disk is replaced. Format Hard Disk." is displayed.
Select [Format]. The message "Formatting Hard Disk...Please wait, also make sure the main
2.
power switch is not turned off." is displayed.
Wait for the machine to finish formatting the hard disk.
3.
•
Do not touch the power switch while the hard disk format is in progress. Wait for the
2.Installation
151