Ricoh IM 550F Field Service Manual page 170

Insert the Ethernet cable into the Ethernet port on this option.
7.
Insert the other end of the Ethernet cable to a PC for network setting.
8.
Plug the power cord into the wall socket and turn on the main power of the machine.
9.
10. Make sure that the machine recognizes this option correctly by doing one of the following:
Access the option's IP address from a web browser.
1.
Ping the option's IP address from a command prompt on a Windows PC in the same network
2.
as the mainframe.
If the IP address cannot be found (DHCP server), use the MAC address. This is the number
printed on the seal attached to the printed circuit board.
Use "RX" + the option's MAC address and access a web browser.
3.
Example: http://RX0080926A3264
Ping "RX" + "MAC address" from the command prompt on a windows PC which is on the
4.
same network as the mainframe.
2.Installation
159