Ricoh IM 550F Field Service Manual page 212

1: The embedded RCG device is being set. Only Box registration is completed. In this status, this
unit cannot answer a polling request from the external RCG.
2: The embedded RCG device is set. In this status, the external RCG unit cannot answer a polling
request.
3: The registered device by the external RCG is being set. In this status, the embedded RCG
device cannot be set.
4: The registered module by the external RCG has not started.
•
SP5-990-002 (SP Print Mode: SP(Mode Data List)
Prints the configuration sheets of the system and user settings: SMC.
Make sure to shut down and reboot the machine once before printing the SMC. Otherwise, the
latest settings may not be collected when the SMC is printed.
•
SP5-811-003 (Machine No. Setting: ID2 Code Display)
Sets the ID-2 code used to identify the @remote device at installation.
•
SP5-816-063 (Remote Service: Proxy server IP address)
This SP sets the address of the proxy server used for communication between the RCG device and
the gateway. Use this SP to set up or display the customer proxy server address.
The address is necessary to set up the embedded RCG-N.
The address display is limited to 127 characters. Characters beyond the 127 characters are
ignored.
This address is customer information and is not printed in the SMC report.
•
SP5-816-064 (Remote Service: Proxy server Port number)
This SP sets the port number of the proxy server used for communication between the embedded
RCG-N and the gateway. This setting is necessary to set up the embedded RC Gate-N.
This port number is customer information and is not printed in the SMC report.
•
SP5-816-065 (Remote Service: Proxy User ID)
This SP sets the HTTP proxy certification username.
The length of the name is limited to 31 characters. Any character beyond the 31st character is
ignored.
This name is customer information and is not printed in the SMC report.
•
SP5-816-066 (Remote Service: Proxy Password)
This SP sets the HTTP proxy certification password.
The length of the password is limited to 31 characters. Any character beyond the 31st character is
ignored.
This name is customer information and is not printed in the SMC report.
•
SP5-816-202 (Remote Service: Letter Number DFU(SSP))
Allows entry of the number of the request needed for the RCG-N device.
•
SP5-816-203 (Remote Service: Confirm Execute)
Executes the inquiry request to the @Remote GW URL.
•
SP5-816-204 (Remote Service: Confirm Result DFU(SSP))
2.Installation
201