Ricoh IM 550F Field Service Manual page 181

2.Installation
14. Press [Send File Type / Name] on the scanner screen.
15. Check if [OCR Settings] is displayed on the Send File Type / Name screen.
•
After installation, the OCR setting can be changed on the "OCR setting" screen.
•
When setting OCR, set [OCR setting] to [Yes]. (Default setting: [No])
Recovery Procedure
When this option is installed, a function is saved on the HDD, and ID information on the SD card is
saved in the NVRAM. Therefore, when replacing the HDD and/or NVRAM, this option must be
reinstalled.
When storing the original SD card
•
When only the HDD is replaced
Reinstall using the original SD card.
•
When only the NVRAM is replaced
When uploading or downloading the NVRAM data, reinstall using the original SD card.
When not uploading or downloading the NVRAM data, order and reinstall a new SD card (service
part).
•
When the HDD and NVRAM are replaced simultaneously
Reinstall using the original SD card.
170