Ricoh IM 550F Field Service Manual page 210

Value
12 Parameter error
20 Dial-up authentication error
21 Answer tone detection error
22 Carrier detection error
23 Invalid setting value (modem)
24 Low power supply current
25 unplugged modem
26 Busy line
Make sure that the screen displays the Location Information with SP5-816-205 only when it has
5.
been input at the Center GUI.
Click [EXECUTE] to execute the registration with SP5-816-206.
6.
Check the registration result with SP5-816-207.
7.
Value
0 Succeeded
1 Request number error
2 Already registered
3 Communication error (proxy
enabled)
4 Communication error (proxy
disabled)
5 Proxy error (Authentication error)
8 Other error
9 Request number confirmation
executing
11 Already registered
12 Parameter error
20 Dial-up authentication error
21 Answer tone detection error
22 Carrier detection error
23 Invalid setting value (modem)
24 Low power supply current
25 unplugged modem
26 Busy line
Exit the SP mode.
8.
SP5-816-208 Error Codes
Caused by Operation Error, Incorrect Setting
Meaning
Meaning
Solution/ Workaround
-
* These errors occur only in the modems that
support @Remote.
Solution/ Workaround
-
Check the request number again.
Check the registration status.
Check the network condition.
Check the network condition.
Check Proxy username and password.
See "SP5-816-208 Error Codes" below this.
Processing... Please wait.
-
-
* These errors occur only in the modems that
support @Remote.
2.Installation
199