Ricoh IM 550F Field Service Manual page 196

the panel display.
Icon Icon
name
Dirty
Clear
Data Overwrite Security (P 800/801)
Before You Begin the Procedure
Make sure that the following settings (1) to (3) are not at their factory default values.
1.
(1) Supervisor login password
(2) Administrator login name
(3) Administrator login password
If any of these settings are at their factory default values, tell the customer that these settings must
be changed before you do the installation procedure.
Make sure that "Administrator Authentication Management" is on.
2.
Log in as the administrator from Web Image Monitor.
1.
[Device Management] -> [Configuration] -> [Device Settings] -> [Administrator Authentication
2.
Management]
From [User Administrator Authentication], [Machine Administrator Authentication], [Network
3.
Administrator Authentication], and [File Administrator Authentication], set the administrator
authentication setting to [On].
If this setting is off, tell the customer that this setting must be on before you do the installation
procedure.
Using Auto Erase Memory
The Auto Erase Memory function can be enabled by the following procedure.
This icon is displayed when there is temporary data to be overwritten, and
flashes during overwriting.
This icon is displayed when there is no temporary data to be overwritten.
Explanation
2.Installation
185