2.Installation
clear SP5-846-046: an address book.
12. Set necessary user settings in the "Settings" menu.
SP descriptions
•
SP5-878-002 (Option Setup: HDD Encryption)
Executes the setup for encryption.
•
SP5-990-005 (SP Print Mode: Diagnostic Report)
Prints the configuration sheets of the system and user settings: SMC.
Make sure to shut down and reboot the machine once before printing the SMC. Otherwise, the
latest settings may not be collected when the SMC is printed.
•
SP5-801-001 (Memory Clear: All Clear)
Resets all correction data for process control and all software counters, and returns all modes and
adjustments to their default values.
•
SP5-801-002 (Memory Clear: Engine)
Clears non-volatile memory of engine.
•
SP5-846-046 (UCS Setting: Addr Book Media)
Displays the slot number where an address book data is in.
0: Unconfirmed
1: SD Slot 1
2: SD Slot 2
3: SD Slot 3
4: USB Flash ROM
10: SD Slot 10
20: HDD
30: Nothing
HDD Encryption (P 800/801)
Before You Begin the Procedure:
Make sure that the following settings (1) to (3) are not at their factory default values.
1.
(1) Supervisor login password
(2) Administrator login name
(3) Administrator login password
If any of these settings are at their factory default values, tell the customer that these settings must
be changed before you do the installation procedure.
Make sure that "Administrator Authentication Management" is on.
2.
Log in as the administrator from Web Image Monitor.
1.
[Device Management] -> [Configuration] -> [Device Settings] -> [Administrator Authentication
2.
Management]
From [User Administrator Authentication], [Machine Administrator Authentication], [Network
3.
192