Ricoh IM 550F Field Service Manual page 176

SD Card Appli Move
Overview
The service program "SD Card Appli Move" (SP5-873) lets you copy application programs from one SD
card to another SD card.
You cannot run application programs from Slot 2. However, you can move application programs from
Slot 2 to Slot 1 with the following procedure.
When merging SD cards, the target SD card should have the largest memory size of all the application
SD cards.
Be very careful when you do the SD Card Appli Move procedure:
•
The necessary data for authentication is transferred with the application program from an SD card
to another SD card. Authentication fails if you try to use the SD card after you copy the application
program from one card to another card.
•
Do not use the SD card if it has been used before for other purposes. Normal operation is not
guaranteed when such an SD card is used.
•
Keep the SD card in a safe place after you copy the application program from one card to another
card. This is for the following reasons:
1) The SD card can be the only proof that the user is licensed to use the application program.
2) You may need to check the SD card and its data to solve a problem in the future.
SD Card Appli Move
Choose an SD card with enough space.
1.
Enter SP5-873 "SD Card Appli Move". This SP copies the application programs from the original
2.
SD card in SD Card Slot 2 to the SD card in SD Card Slot 1. Move the application from the SD card
in Slot 2 to the card in Slot 1.
Exit the SP mode.
3.
Move Exec
The menu "Move Exec" (SP5-873-001) lets you copy application programs from the original SD card to
another SD card.
•
Do not turn ON the write protect switch of any application SD card. If the write-protect switch is
ON, a download error (e.g. Error Code 44) occurs during a firmware upgrade or application
merge.
Turn OFF the main power.
1.
Make sure that an SD card is in SD Card Slot 1. The application program is copied to this SD card.
2.
Insert the SD card (having stored the application program) in SD Card Slot 2. The application
3.
program is copied from this SD card.
2.Installation
165