Show Ports Stats Stg Command Output; Nortel Ethernet Routing Switch 8300 Series; Routine Maintenance; Nn46200-514 03.01 Standard - Nortel 8300 Series Maintenance Manual

Hide thumbs Also See for 8300 Series:

Table of Contents

42 Routine software maintenance

Figure 9 "show ports stats stg command output" (page 42)

output for the show ports stats command.

Figure 9

show ports stats stg command output

Monitoring port statistics

The monitor commands are self-updating show commands. To set the

monitor duration and interval, use the following command:

config cli monitor

The config cli monitor command includes the following options:

config cli monitor

followed by:

info

duration <integer>

interval <integer>

4.0 27 August 2007

Displays current level parameter settings

and next level directories.

Sets the monitor time duration. To clear

the display, type Ctrl/L.

•

integer is an integer value with a

range of 1 to 1 800 seconds

Sets the monitor time interval. To clear the

display, type Ctrl/L.

•

integer is an integer value with a

range of 1 to 600 seconds

shows a sample

Table of Contents