maintenance
Fan Removal and Installation Option 2 (Rear Fan Access)
To remove the fan:
1. Unplug or disconnect the power source to the heater and shut off the gas
supply.
2. Remove the faceplate, glass guard, door, logs, glass media and burner.
3. Remove the flue adapter.
4. Detach the gas access panel by removing 7 screws and disconnecting the gas
line from the valve.
5. Pull the unit out and remove the rear fan access panel by removing 8 screws.
6. Disconnect 3 fan connectors and lift the fan up and out.
7. Reverse the above steps to install the new fan.
Replace gas access panel gasket if it has been damaged.
32
|
Regency GFi750 Gas Inbuilt Fireplace