Table of Contents
Advertisement
operating instructions
Normal Operating Sounds Of Gas
Appliances
It is possible that you will hear some sounds from your
gas appliance. This is perfectly normal due to the fact that
there are various gauges and types of steel used within
your appliance. Listed below are some examples. All are
normal operating sounds and should not be considered
as defects in your appliance.
Blower:
Regency gas appliances use high tech blowers to push
heated air farther into the room. It is not unusual for the
fan to make a "whirring" sound when ON. This sound will
increase or decrease in volume depending on the speed
setting of your fan speed control.
Burner Tray:
The burner tray is positioned directly under the burner
tube(s) and logs and is made of a different gauge material
from the rest of the firebox and body. Therefore, the varying
thicknesses of steel will expand and contract at slightly dif-
ferent rates which can cause "ticking" and "cracking" sounds.
You should also be aware that as there are temperature
changes within the unit these sounds will likely re-occur.
Again, this is normal for steel fireboxes.
Gas Control Valve:
As the gas control valve turns ON and OFF, a dull clicking
sound may be audible, this is normal operation of a gas
regulator or valve.
Unit Body/Firebox:
Different types and thicknesses of steel will expand and
contract at different rates resulting in some "cracking" and
"ticking" sounds will be heard throughout the cycling process.
24
|
Regency GFi750 Gas Inbuilt Fireplace
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS
APPLIANCE WHILE IN OPERATION.
DO NOT USE OR STORE FLAMMABLE MATERIALS IN OR
NEAR THIS APPLIANCE.
DO NOT PLACE ARTICLES ON OR AGAINST THIS
APPLIANCE.
DO NOT MODIFY THIS APPLIANCE.
"Appliances incorporating a
live fuel effect and designed
to operate with luminous
flames may exhibit slight
carbon deposition."
IMPORTANT
In the event of power loss or outage, the
appliance will shut down automatically. To
return to normal operation, the appliance
will have to be restarted. To restart, press
the ON/OFF switch on the remote control.
WARNING:
Advertisement
Table of Contents
