Regency GFi750 Owners & Installation Manual page 26

Table of Contents

Advertisement

operating instructions
Temperature Indication Display
With the system in the "OFF" position, press the Thermostat Key and the
Mode Key at the same time. Look at the LCD screen on the transmitter to
verify that a C or F is visible to the right of the room temperature display
(Figures 4 & 5).
Figure 4: Remote Control
Display in Fahrenheit.
Turn on the
Appliance
With the system OFF, press the ON/OFF
Key on the Transmitter. The Transmitter
display will show some other active
Icons on the screen. At the same time
the Receiver will activate the appliance.
A single "beep" from the Receiver will
confirm reception of the command.
Turn off the Appliance
With the system ON, press the ON/OFF Key on the Transmitter. The
Transmitter LCD display will only show the room temperature (Fig. 6). At
the same time the Receiver will turn off the appliance. A single "beep"
from the Receiver confirms reception of the command.
26
|
Regency GFi750 Gas Inbuilt Fireplace
Figure 5: Remote Control
Display in Celsius.
Figure 6: Remote Control
Display
Remote Flame Control
The Proflame has six (6) flame levels. With the system on, and the flame
level at the maximum in the appliance, pressing the Down Arrow Key
once will reduce the flame height by one step until the flame is turned off.
The Up Arrow Key will increase the flame height each time it is
pressed. If the Up Arrow Key is pressed while the system is on but the
flame is off, the flame will come on in the high position. ( Fig. 7 & 8 ) A
single "beep" will confirm reception of the command.
Fig. 7
Fig. 8
Room Thermostat (Transmitter
Operation)
The Remote Control can operate as a room thermostat. The thermostat
can be set to a desired temperature to control the comfort level in a
To activate this function, press the Thermostat Key (Fig. 1). The LCD
display on the Transmitter will change to show that the room ther-
mostat is "ON" and the set temperature is now displayed (Fig. 9). To
adjust the set temperature, press the Up or Down Arrow Keys until the
desired set temperature is displayed on the LCD screen of the Trans-
Figure 9
room.
mitter.
Figure 10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gfi750ngGfi750lpGfi750ulpg

Table of Contents