Data And Marking - Wega Mininova Classic EMA 2GR Use And Maintenance Manual

Mininova

2.6 Data and marking

The machine's technical data is shown in the following table:
TECHNICAL DATA
220-240 V Power
Frequency
Heating unit
Internal tank capacity
Safety valve calibration
Heating unit operating
pressure
Mains water pressure
Coffee dispensing
pressure
Working environment
temperature
Sound pressure level
In compliance with directive 2006/42/CE, the machine
is marked with the CE code with which the manufacturer
declares under his responsibility that the machine is safe for
persons and things.
Alternative markings can be affixed according to the
target markets, provided they comply with current product
regulations.
The nameplate which provides the appropriate markings,
identification data and specific technical data, is affixed
under the drain tray.
An example of a nameplate is provided below:
MARCHIO COMMERCIALE
WEGA MACCHINE PER CAFFÈ S.r.l.
Via C. Bardini,1 SUSEGANA (TV) - ITALY
Tel. +39.0438.1799700 Fax +39.0438.1884890
S/N:
V
When contacting the Manufacturer, always provide the
following information:
• S/N - machine serial number
• Mod. - machine model
• Y - year of manufacture
The appliance data can also be found on the label located on
the machine's packaging.
IT is forbidden to remove or damage the
nameplate. If this occurs, replace it as a matter of
urgency, dealing
Manufacturer.
30 148
of
2200 - 3200 W
50-60 Hz
2 l
4 l
0,19 MPa (1,9 bar) +/- 0,015 MPa
0,08 - 0,14 MPa (0,8 - 1,4 bar)
0,15 - 0,6 MPa MAX (1,5 - 6 bar MAX)
0,8 - 0,9 MPa (8 - 9 bar)
5 - 35°C - 95% U.R.MAX
< 70 dB
Y
Mod.
Hz
W
MADE IN ITALY
exclusively through
2
2 5
the
Q
The nameplate is affixed
under the drain tray
User MANUAL