Data And Ce Marking - Wega MyConcept EVDP 2GR Use And Maintenance Manual

Data and CE marking

2.6
The technical data of the machine is shown in the
following table:
TECHNICAL DATA TABLE
Voltage 230/400 V 240/415 V 230/400 V 240/415 V 230/400 V 240/415 V
Frequency 50/60 Hz
Max power 4,400 W
Group power 150 W x 2 165 W x 2 150 W x 3 165 W x 3 150 W x 4 165 W x 4
1,000 W
Coffee boiler power
x 2
Steam boiler power 3,000 W
Coffee boiler capacity
Steam boiler capacity
Width
Depth
Height
Net weight
Safety valve
calibration (bar)
Steam boiler
operating pressure
Feedwater pressure
Coffee dispensing
pressure
Operation mode
temperature
Sound pressure level
According to the Directive 2006/42/EC, the machine is
marked with the CE marking, by which the manufacturer
declares, under its own responsibility, that the machine
is safe for people and things.
The CE nameplate is affixed to the base of the frame
under the drain pan on which the identification data is
reported. Below is an example of the nameplate:
MARCHIO COMMERCIALE
WEGA MACCHINE PER CAFFÈ S.r.l.
Via C. Bardini,1 SUSEGANA (TV) - ITALY
Tel. +39.0438.1799700 Fax +39.0438.1884890
S/N:
V
10 76
of
2GR 3GR
50/60 Hz 50/60 Hz
4,700 W 5,500 W
1,090 W 1,000 W
x 2 x 3
3,270 W 3,000 W
1,2 l x 2 1,2 l x 3
8 l 13 l
800 mm 1040 mm
580 mm 580 mm
590 mm 590 mm
95 kg 117 kg
1.9 bar
0.8 - 1.4 bar
1,5 - 5 bar MAX
8 - 9 bar
5 - 40°C 95° MAX R.U.
< 70 dB
Mod. Y
Hz
W
MADE IN ITALY
4GR
50/60 Hz 50/60 Hz 50/60 Hz
6,100 W 7,100 W 7,700 W
1,090 W 1,000 W 1,090 W
x 3 x 4 x 4
3,270 W 5,000 W 5,445 W
1,2 l x 4
13 l
1280 mm
580 mm
590 mm
142 kg
By entering the section "Menu" (see instructions in
the next chapters) and selecting the key
can view the machine's serial number.
For any communication with the Manufacturer, al-
ways note the following information:
• S/N - machine serial number;
• Mod. - machine model
• Y - year of manufacture;
The data of the appliance can be seen also on the
label located on the package of the machine.
It is forbidden to remove or damage the nameplate. If it needs
replacing urgently, always exclusively contact the Manufacturer.
The CE nameplate is fixed
on the base of the frame
under the drain pan.
TECHNICIANS manual
, you