Multitech MMH900 User Manual page 63

The H7 Menu is as follws:
INTERNAL DSU COMMANDS
#DSUCL SELECTS CLOCKING FOR INTERNAL DSU.
#DSUSP SELECTS SPEED FOR INTERNAL DSU.
For HELP on a specific command, enter "ATH" followed by a command
letter.
The H8 Menu is as follows:
INTERNAL MMH2834 COMMANDS
$M(ASYNC/SYNC)
$M(DIAL/LEASED)
$MWIRE(2/4)
$MMTL(0/1)
$M(ANSWER/ORIGINATE)
$MCOMMAND(0/1)
$MTR(28800/91200
/1440/9600)
For HELP on a specific command, enter "ATH" followed by a command
letter.
Chapter 5 - Commands
SYNC OR ASYNC.
DIAL UP OR LEASE LINE
2 OR 4 WIRE LEASE LINE
TRANSMIT LEVEL 1 OR -10DB
ANSWER OR ORIGINATE
MODE FOR LEASED LINE
ENABLE OR DISABLE
COMMAND MODE
DATA TRANSMISSION RATE
63