Introduction; Safety Warnings; Unpacking - Multitech MMH900 User Manual

4.1

Introduction

This chapter explains how to unpack and install your MultiMux cabinet.
4.2

Safety Warnings

1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
3. Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
4. Use caution when installing or modifying telephone lines.
5. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electrical shock from
lightning.
6. Do not use the telephone to report a gas leak in the vicinity of the
leak.
4.3

Unpacking

Unpack and check all the items in the MultiMux shipping list to ensure
that you have received the correct options and accessories.
MultiMux Components
A. MultiMux Cabinet
B. User Guide
C. Power cord
D. RJ11 phone cable (for internal modem)
E. RJ48 phone cable (for internal DSU)
F. Mux Converter Cable (for internal ISDN terminal adapter)
G. Composite Link cable ( for external modem)
Inspect the MultiMux cabinet for visible shipping damage. If damage is
observed, do not power-on the unit; refer to Chapter 8 of this Guide and
contact Multi-Tech's Tech Support for advice. If no damage is observed,
place the MultiMux cabinet in its final location.
Save the packing material for possible future use (e.g., return or
relocation).
Chapter 4 - Installation
45