Daikin RXTA30B2V1B Service Manual page 183

RXTM-R+RXTP-R+ARXTP-R+RXTA-B+FTXTA30B2V1B(W)
(B)+FTXTM30+40R2V1B+FTXTP25+35M5V1B+ATXTP25+35M5V1B
R32 Optimized Heating 4 Split
ESIE21-12A – 2022.02
a
a Screw
b Swing flap motor gearcase assembly
2 Connect the rocker arm to the swing raster.
b
c
a Fan guard
b Rocker arm
c Swing raster
3 Tighten the 3 screws to fix the swing flap motor assembly.
4 Route the wiring harness through the harness retainers.
5 Install new tie straps to fix the wiring harness as needed.
6 Install the right side fan guard on the indoor unit (by clicking it on).
7 Install the secondary swing flap in the indoor unit (by clicking it on).
8 Install the main swing flap in the indoor unit (by clicking it on).
9 Install the main swing flap motor, see
10 Install the switch box, see
Is the problem solved?
Yes
No
b a
a
"Repair procedures" [
4
"4.17 Plate work" [ 144].
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
4 Components
|
a
4
174].
Service manual
183