Daikin RXTA30B2V1B Service Manual page 177

RXTM-R+RXTP-R+ARXTP-R+RXTA-B+FTXTA30B2V1B(W)
(B)+FTXTM30+40R2V1B+FTXTP25+35M5V1B+ATXTP25+35M5V1B
R32 Optimized Heating 4 Split
ESIE21-12A – 2022.02
a
b
a Main swing flap
b Secondary swing flap
c Screw (swing flap motor fixation)
d Swing flap motor
3 Install and tighten the screw to fix the swing flap motor.
4 Install the secondary swing flap in the indoor unit (by clicking it on).
5 Install the main swing flap in the indoor unit (by clicking it on).
6 Install the switch box, see
Is the problem solved?
Yes
No
FTXTP-M and ATXTP-M units
1 Install the swing flap motor in the correct location on the swing flap.
b
a Cover
b Screw
c Swing flap motor
2 Install and tighten the screw to fix the swing flap motor.
3 Connect the connector to the swing flap motor.
4 Install the cover.
c d
4
"4.17 Plate work" [ 144].
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
c a
4 Components
|
Service manual
177