Operator's Manual Simple AFG Application
Power the Instrument On and Off
Power On
•
Insert the AC power cord into the power receptacle on the rear panel.
•
Use the front-panel power button
•
Wait until the system shows windows desktop.
•
The Simple AFG software will start automatically if at the previous power off the instrument was
working in AFG mode.
Alternatively push the AFG icon
Switch To button
Power Off
•
Close the application in use.
•
Press the front-panel power button
Protect Your Instrument from Misuse
Check Input and Output Connectors
When connecting a cable, be sure to distinguish the input connector from the output connectors to avoid
making the wrong connection.
to power on the instrument.
to launch the application from the desktop or push the
to switch in AFG mode from another application.
to power off the instrument.
14