Burst; Burst Mode - Teledyne T3AWG3K Series Operator's Manual

Hide thumbs Also See for T3AWG3K Series:

Table of Contents

Operator's Manual Simple AFG Application

Burst

In Burst mode a waveform is repeated a predefined number of times or until the Trigger signal is at High

Level depending on the selected Burst Type. This Run Mode is available for all waveforms except the DC

level.

The burst mode allows to define the behaviour of the instrument after the Trigger reception. Touching

the "Mode" button the following menu opens and it is possible to select the burst type.

Table of Contents

T3awg325x T3awg335x