Chery A21 2005 Service Manual page 99

CHERY A520 SERVICE MANUAL
2) Use torque wrench and 17# sleeve to
loosen
assembly and steering knuckle.
Torque: 85±5N.m
3) Use box end wrench to loosen the bolts
connecting the brake hose and brake
caliper. (If only friction disc needs to be
replaced during maintenance, there is no
need to dismantle the brake pipeline).
Note: Since brake fluid is poisonous, you
should prevent the brake fluid from splashing
onto your clothes or skin when dismounting the
brake hose.
Torque:
4) Screw off the nuts and bolts mentioned in
nd
the 2
caliper from the steering knuckle, and
isolate the brake caliper from the brake
hose.
Note: Since brake fluid is poisonous, you
should prevent the brake fluid from splashing
onto your clothes or skin when dismounting the
brake hose.
5) Use punch to rectify the notch as
illustrated in the figure, and use 30# sleeve
and torque wrench to dismount the clamp
nut.
Torque: 78±5N.m
PDF created with pdfFactory Pro trial version
the bolts connecting
rd
and 3 steps, remove the brake
brake
7
www.pdffactory.com
CHASSIS