Chery A21 2005 Service Manual page 55

3) Mount the connecting rod upper bearing
and connecting rod together.
Note: The bearing notch should be in
alignment with the notch on the connecting
rod.
4) Apply engine lubricant onto the engine
cylinder, use special tools to clamp the
piston ring, and use wood handle to
slightly knock on the piston head so as
to mount the piston connecting rod
assembly.
Note: The end of the connecting rod with
points should point at the 1st engine cylinder,
and be consistent with the direction of arrow
at the piston top surface.
Mount the connecting rod lower bearing
5)
and connecting rod cap together, and
apply engine lubricant onto the bearing.
Note: The bearing notch should be in
alignment with the connecting rod notch.
6) Latch on the connecting rod cap and
fasten the bolt.
Torque: 25±3N•m, and then screw it for 90
°±5°.
PDF created with pdfFactory Pro trial version
46
www.pdffactory.com