Chery A21 2005 Service Manual page 431

CHERY A21 SERVICE MANUAL
4) Dismantle the accessories, such as
dynamo,
steering pump and bracket. （See the
"replacement of engine accessory" for
details）
5) Dismantle the engine cylinder head
assembly. （ See the "replacement of
cylinder head" for details）
6) Dismantle the engine clutch pressure
plate, the flywheel and the timing belt
pulley.
7) Remove the oil pan and engine oil
strainer. （See the "replacement of oil pan
and strainer" for details.）
8) Remove the piston connecting rod
assemblies for 4 cylinders and Put them
in order.
Note: You'd better stick the number on each
piston connecting rod assembly to prevent
from wrong mounting.
9) Dismantle engine oil pump assembly.
10) Dismantle the frame assembly under
cylinder
crankshaft and thrust washer.
7.3 Inspection
1) radial clearance of crankshaft
a): Clean the journal and bearing bushing.
b): Install crankshaft
c): Make the length of plastic clearance
gauge equal to the width of bearing.
Then put it on the journal paralleling the
axis.
PDF created with pdfFactory Pro trial version
A/C compressor,
block and remove
MECHANISM OF 2.0NALC ENGINE
power
the
Clearance Gauge
42
www.pdffactory.com