Chery A21 2005 Service Manual page 26

9) Carefully handle the bracket and A/C
compressor, and dismantle them.
3.3 Installation steps
Installation steps is opposite to Process of
removal.
4 Replacement of Power Steering Pump
4.1 Needed tools and auxiliary materials
17#open
wheel,ratchet rod, power steering oil.
4.2 Process of removal
1) Pull out the harness plugs of power
steering switch: use17#open end wrench
and vice clamp to loosen the connecting
bolts of oil pipe and clips, and discharge
the power steering oil.
2) Dismantle the dynamo belt. Detailed
removal methods are shown in the
"displacement of dynamo belt".
3) Dismantle the bolt connecting power
steering oil pump and bracket.
4) otate the steering pump pulley to make
the fixed bolt exposed, and then screw it
off. At this time, you can dismantle the
power steering pump.
PDF created with pdfFactory Pro trial version
end wrench,ratchet
www.pdffactory.com
17