Chery A21 2005 Service Manual page 62

7.4 Installation
1) Clean up the short engine, and apply
engine lubricant.
2) Install the crankshaft correctly, and
mount the thrust washer in proper
position.
3) Latch on the cylinder block frame, and
fasten the crankshaft fixed bolts.
The fastening sequence is illustrated in the
figure.
Torque:
4) Mount the bolts onto the
periphery, and fasten them.
Torque:
5) Mount oil strainer, oil pan, front and
rear oil seals of crankshaft and oil pump.
6) Mount engine accessories, lift and
install the engine onto the car, mount
water pipe, and insert all electrical
plugs.
PDF created with pdfFactory Pro trial version
frame
53
www.pdffactory.com