Chery A21 2005 Service Manual page 465

CHERY A520 SERVICE MANUAL
NOTICE FOR INSTALLATION:
Installation of the adjusting washers, side
gears, spherical washers, planetary gears and
the planetary gear shaft:
(1) Assemble
respectively on the backs of the side
gears and put the side gears in place
within the differential.
Remark: the adjusting washer for any new
side gear shall have an appropriate thickness
(0.93-1.00 mm).
(2) Engage two planetary gears with side
gears behind the spherical washers on
the backs of the planetary gears. When
rotating any of these gears, you shall put
it into appropriate place.
(3) Insert the planetary gear shaft.
(4) Measure the clearances between side
gear and planetary gear.
Standard value: 0.025-0.150 mm
(5) If any measured clearance does not
measure up, please select and install the
appropriate adjusting washer(s) and then
measure the clearances again.
Remark: adjust the clearances on both sides
so as for them to be equal.
PDF created with pdfFactory Pro trial version
the adjusting washers
www.pdffactory.com
QR519 TRANSMISSION
Figure 44
Figure 45
Figure 46
31