Chery A21 2005 Service Manual page 428

CHERY A21 SERVICE MANUAL
2) Engage the gear to 5th, then press the
brake
connecting bolt of timing belt pulley and
crankshaft with torque wrench. Remove
the timing belt.
Torque:130±10,then screw 65°±5°
3) Pry out the old oil seal with right-angled
screwdriver carefully.
Note: Be careful in dismantling the oil seal
not to damage the oil seal seat ring.
4.2.2 Installation
1) Clean the oil seal seat ring and spread
transmission oil on the seat ring
2) Spread transmission oil at the seal lip.
3) Enclose the guide sleeve of crankshaft
oil seal, special tool, with that oil seal.
4) Press the oil seal into oil seal seat ring
and knock it to right position with
hammer.
5. Replacement of oil pump
5.1 Needed tools and auxiliary materials
A set of big sleeves, a set of small sleeves
and a set of open end wrench
PDF created with pdfFactory Pro trial version
with toes, Dismantle
Guide Sleeve of Crankshaft Oil Seal
MECHANISM OF 2.0NALC ENGINE
the
39
www.pdffactory.com