Chery A21 2005 Service Manual page 23

1 Replacement of Dynamo belt
1.1 Needed tools and auxiliary materials 13
#open end wrench and new dynamo belt
1.2 Process of removal
As the figure illustrated, rotate the13#open
end wrench counterclockwise and recede the
tension pulley. At the same time, the belt
tension shall disappear, so you can dismantle
the belt.
1.3 Installation steps
The installing steps are reverse to those for
removal.
2 Replacement of Generator Assembly
2.1 Needed tools and auxiliary materials
Allen wrench, ratchet wheel, 13# sleeve,
10# open end wrench.
2.2 Process of removal:
1) Dismantle the negative pole harness of
battery.
2) Dismantle the bolts connecting the
generator and harness, and take out the
harness.
3) Pull out the harness plugs of generator
regulator.
PDF created with pdfFactory Pro trial version
SECTION III ENGINE ACCESSORIES
14
www.pdffactory.com