Chery A21 2005 Service Manual page 124

CHERY A520 SERVICE MANUAL
Kingpin caster
angle
Front wheel
camber angle
Front wheel
toe-in
Kingpin
inclination angle
I. CHECK AND REGULATE THE
FRONT-WHEEL
ANGLE,
ANGLE,
ANGLE AND STEERING ANGLE:
Criteria: Front wheel alignment should meet
the requirements as follows:
II. FRONT WHEEL TOE-IN
STEERING ANGLE ADJUSTMENTS
1. Front wheel toe-in
Toe-in adjustment can be done by use of
optical test instrument or mechanical toe-in
regulator. Wheel aligner or alignment tester
should be installed on the wheels.
Installation should be carried out according
to the concrete instructions of the equipment
manufacturers.
(1) To meet the requirement of test
instruments,
preparations for the wheel alignment,
and use the steering wheel limiter
purchased on the market to fix the
steering wheel in the right ahead
position .( The steering wheel must be
at the central position ±5°, and the
lower clamping flange bolts of steering
shaft must be horizontal.)
PDF created with pdfFactory Pro trial version
SECTION II FRONT WHEEL ALIGNMENT
0
2 50'±30'
0
±10'
0
5'47＂±5'(or
1mm)
0
12 35'±30'
KINGPIN CASTER
FRONT-WHEEL CAMBER
FRONT-WHEEL
you should
TOE-IN
AND
make
43
www.pdffactory.com
CHASSIS