Chery A21 2005 Service Manual page 29

3) Use 10# sleeve to dismantle the fixed
bolts of ignition coil.
8.3 Installation steps
Installation steps is opposite to Process of
removal.
9 Replacement of High Voltage Cable
9.1 Process of removal
1) Remove one end of the high voltage
cable from the ignition coil.
2) Pull out the connection end of high
voltage cable and sparking plug, and
dismantle the high voltage cable.
Note: If the spare parts of high voltage cable
corresponding to various cylinders are
ordered, you can replace the high voltage
cable of single cylinder; otherwise, you must
replace the assembly.
9.2 Installation steps
The installing steps are reverse to those for
removal.
PDF created with pdfFactory Pro trial version
20
www.pdffactory.com