Chery A21 2005 Service Manual page 68

Chery Service Manual for A520
Note: ① To install the glass, align the
reference marks on the glass and
the body and then lightly press the
glass into from the edge.
② Apply the bonding agent on the edges of
the glass with a scraper.
③ Clear the excessive or over flown
bonding agent with a scraper.
④ Clamp the glass until the bonding agent
is harden.
Check for water leakage and repair it:
① Perform the leakage test after the
hardening period.
② Seal the leakage part with sealant
13. Install the upper moulding of the
windshield;
Install the upper moulding on the body and
tap it lightly to fasten it.
Install the outer moulding
PDF created with pdfFactory Pro trial version
Body Dimension and Accessories
2.7 mm (0.11 inch)
6
www.pdffactory.com
Figure 162
Figure 163
Figure 164