Chery A21 2005 Service Manual page 444

CHERY A520 SERVICE MANUAL
7. Directly take out the reverse synchronizer
ring;
8. Engage some forward gear, and then
remove the elastic lock pin by using a
punch before moving down the 5th shift
fork and gear. Once the input shaft
interlocks with the output shaft, use a
torque wrench to screw off the tight nut
for the 5th driven gear counterclockwise.
(Note: alternatively, you can engage the 5th
gear and put a thin copper bar (or any other
low-hardness metal bar) between the 5th
driving and driven gears, and then use a
torque wrench to screw off the tight nut for
the 5th driven gear counterclockwise.)
9. Similarly, use the torque wrench to screw
off the tight nut for the 5th driving gear
counterclockwise;
PDF created with pdfFactory Pro trial version
Reverse
Synchronizer
Ring
10
www.pdffactory.com
QR519 TRANSMISSION
Figure 7
Figure 8
Figure 9