Chery A21 2005 Service Manual page 86

Chery Service Manual for A520
4. Remove the cover, and then unscrew the
fastening screws of the seat belt;
5. Remove the lower trim panel for B
pillar;
6. Remove the fixing bolts for the seat
belt;
Assembly requirements: The installation
angle of the left/right front seat belt retractor
assembly is 80°. The tightening torque for the
catch bolt is 50±5N•m. The tightening torque
for the fixing bolt of the slider track assembly
is 50±5N•m. The tightening torque for the
fixing bolt of the guide ring is 50±5N•m. The
support for guiding should be fixed reliably
with the tightening torque for the screw of
which is 1.5±0.5 N•m. The tightening torque
for the fixing bolt of the end piece is
50±5N•m. The lock striker assembly should
be reliably positioned on the special
PDF created with pdfFactory Pro trial version
Body Dimension and Accessories
2
www.pdffactory.com
Figure 96
Figure 97
Figure 98