Set Up A Wifi On/Off Schedule For An Ssid - NETGEAR WAX214 User Manual

NETGEAR WiFi 6 AX1800/AX3600 Dual Band PoE/PoE+ Access Points, WAX214 and WAX218
The Device Status page displays.
4. Under Network, select Wireless.
The Wireless Settings page displays.
5. Do one of the following:
• Disable the 802.11ax mode for the 2.4 GHz radio: Select the 11ax Disable
radio button.
• Enable the 802.11ax mode for the 2.4 GHz radio: Select the 11ax Enable
radio button. This is the default mode.
6. Click the Save button.
Your settings are saved but not yet applied.
A pop-up window displays. The window shows the number of changes to be applied.
7. In the pop-up window, click the Apply button.
Your changes are applied. If the WiFi link must be reestablished, the page displays
the number of seconds before the access point is back online.

Set up a WiFi on/off schedule for an SSID

You can set up a WiFi on/off schedule. Scheduling an SSID to be turned off is a green
feature that allows you to turn off WiFi during scheduled vacations, office shutdowns,
on evenings, or on weekends. You can set up and manage a WiFi on/off schedule for
each SSID.
Before you enable and set up a WiFi on/off schedule, make sure that the time zone
settings are synchronized with your local time. For more information, see Manage the
date and time settings on page 97.
To set up a WiFi on/off schedule for an SSID:
1. Launch a web browser from a computer or mobile device that is directly connected
over WiFi to the access point or connected to the same network as the access point.
2. Enter the IP address that is assigned to the access point.
If you are directly connected to the "CONFIG-ONLY" SSID, you can enter
https://www.aplogin.net.
A login window displays.
If you do not know the IP address, see Find the IP address of the access point on
page 33. For more information about the "CONFIG-ONLY" SSID, see 2.4 GHz
management SSID on page 58.
Manage the Advanced WiFi and
Radio Settings
75 User Manual