Table 95. +Cmee Parameters - Motorola g20 Developer's Manual

AT Commands Reference
The following table shows the +CMEE parameters.
<Parameter>
<n> 0
1
2
The default value is 0.
<err> Numeric format followed by verbose format:
0
1
2
3
4
5
6
7
10
11
12
13
14
15
16
17
18
20
21
22
23
24
25
26
27
30
31
32
40
41
42
43
44
45
46
198

Table 95. +CMEE Parameters

Description
Disable the +CME ERROR: <err> result code and
use ERROR.
Enable the +CME ERROR: <err> result code and
use numeric <err> values.
Enable +CME ERROR: <err> result code and use
verbose <err> values.
Phone failure
No connection to phone
Phone-adaptor link reserved
Operation not allowed
Operation not supported
PH-SIM PIN required
PH-FSIM PIN required
PH-FSIM PUK required
SIM not inserted
SIM PIN required
SIM PUK required
SIM failure
SIM busy
SIM wrong
Incorrect password
SIM PIN2 required
SIM PUK2 required
Memory full
Invalid index
Not found
Memory failure
Text string too long
Invalid characters in text string
Dial string too long
Invalid characters in dial string
No network service
Network timeout
Network not allowed - emergency calls only
Network personalization PIN required
Network personalization PUK required
Network subset personalization PIN required
Network subset personalization PUK required
Service provider personalization PIN required
Service provider personalization PUK required
Corporate personalization PIN required
98-08901C68-O