Table of Contents
Advertisement
AT
Command
GPRS
GPRS Commands
+CGCLASS
This command sets the GPRS mobile station class.
+CGDCONT
This command specifies the PDP (Packet Data Protocol) context.
+CGQMIN
This command sets the minimum acceptable quality of service profile.
CGQREC
This command returns the requested quality of service profile.
+CGACT
This command activates/deactivates the PDP Context.
+CGATT
This command attaches the g20 to the GPRS network.
D*99
This command enables the MT to perform the actions necessary for establishing
communication between the terminal and the external PDN.
+CGPRS
This command indicates whether there is GPRS coverage.
NOP Compatible
Ignored (Compatible Only) Commands
%C
This command enables/disables data compression. This command is used for
backward compatibility only.
&G
This command selects the guard tone. This command is used for backward
compatibility only.
&L
This command enables leased line operation. This command is used for backward
compatibility only.
&M
This command enables asynch/synch mode connection.This command is used for
backward compatibility only.
&P
This command selects pulse dialing. This command is used for backward
compatibility only.
&R
This command selects the CTC controls.This command is used for backward
compatibility only.
&S
This command defines the DSR behavior. This command is used for backward
compatibility only.
&T
This command selects tone dialing. This command is used for backward
compatibility only.
98-08901C68-O
Table 3. AT Commands (Continued)
Description
Product Features
Page
211
212
216
217
219
221
223
225
226
226
226
226
226
226
226
226
25
Advertisement
Table of Contents
