AT
Command
+CBST
This command selects the bearer service and the connection element to be used
when data calls are originated.
O
This command returns a phone to the Online Data mode and issues a CONNECT or
CONNECT <text> result code.
+COLP
This command refers to the GSM supplementary service COLP, Connected Line
Identification Presentation, which enables a calling subscriber to get the connected
line identity (COL) of the called party after setting up a mobile originated call.
Call Status Messages
+CPAS
This command returns the current activity status of the g20, for example, call in
progress, or ringing.
+CLCC
This command returns a list of all current g20 calls and their statuses, and also
enables/disables the unsolicited indication of the call list.
+CAOC
This command enables the subscriber to get information about the cost of calls.
Phone and Date Books
Directory Access Commands
+CPBS
This command selects the memory that is to be used for reading and writing entries
in g20s that contain more than one phone book memory.
+CPBR
This command recalls phone book entries from a specific location number, or from a
range of locations.
+MPBR
This command recalls phone book entries from a specific location number, or from a
range of locations.
+CPBF
This command enables the accessory to search the currently active phone book for
a particular entry, by name.
+MPBF
This command enables the accessory to search the currently active phone book for
a particular entry, by name, and returns fields that are unique to Motorola phones.
+CPBW
This command enables the accessory to store a new entry in the phone book, or
delete an existing entry from the phone book.
+MPBW
This command enables the accessory to store a new entry in the phone book, or to
delete an existing entry from the phone book.
98-08901C68-O
Table 3. AT Commands (Continued)
Description
Product Features
Page
77
80
80
84
86
89
94
96
98
101
103
105
108
19