Table of Contents
Advertisement
Reference Tables
AT
Command
S0
This S-parameter represents the number of rings before the g20 is answered
automatically.
S102
This command sets the value of the delay before sending the data to the terminal.
S24
This S-parameter activates/disables the Sleep mode. If the parameter value is
greater than 0, it represent the number of seconds till the g20 enters sleep mode.
S3
This S-parameter represents the decimal IA5 (International Alphabet No. 5) value of
the command line termination character that terminates an incoming command line.
S4
This S-parameter represents the decimal IA5 (International Alphabet No. 5) value of
the response formatting character that is generated by the g20 as part of the header,
trailer, and terminator for result codes and information text, along with the S3
parameter.
S5
This S-parameter represents the decimal IA5 (International Alphabet No. 5) value of
the command line editing character that the g20 recognizes as a request to delete
the immediately preceding character from the command line.
S94
This S-parameter represents the Boolean status, On/Off, of the sidetone feature.
S96
This S-parameter represents the Boolean status, On/Off, of the echo cancelling
feature.
T
This command selects tone dialing. This command is used for backward
compatibility only.
V
This command determines the response format of the data adapter and the contents
of the header and trailer transmitted with the result codes and information
responses.
X
This command defines the data adaptor response set, and the CONNECT result
code format.
Y
This command disconnects on long space.This command is used for backward
compatibility only.
Z
This command resets the default configuration.
314
Table 137. AT Commands (Alphabetical) (Continued)
Description
Page
187
194
193
187
187
187
160
161
226
181
185
226
190
98-08901C68-O
Advertisement
Table of Contents
