Table 49. +Csdh Parameters - Motorola g20 Developer's Manual

Test Command
The Test command lists all the supported values for <show>.
Command
+CSDH=?
The following table shows the +CSDH parameters.
<Parameter>
<show> 0
1
Example
AT+CSDH=0
OK
AT+CSDH?
+CSDH: 0
OK
AT+CSDH=?
+CSDH=(0)
OK
4.5.1.7 +CNMI, New Message Indications to Terminal
This command handles enabling of unsolicited notifications to the terminal when an SM is received by the g20.
Set Command
Command
+CNMI=[<mode>[,<mt>[,<bm>
[,<ds>[,<bfr>]]]]]
98-08901C68-O
+CSDH: (list of supported <show>s)

Table 49. +CSDH Parameters

Description
Do not show header values in result codes
Show header values in result codes
OK
or:
+CMS ERROR: <err>
Response/Action
Response/Action
AT Commands Reference
125