Table of Contents
Advertisement
AT Commands Reference
Table 132. +MIPSEND Parameters (Continued)
<Parameter>
Data
Data string received with 0-F hexadecimal digits. (String
ends with a null)
Example
(socket 4 wasn't opened using +MIPOPEN AT command)
at+mipsend=4,"4444"
ERROR
at+mipsend=1,"4444"
+MIPSEND: 1,1498
OK
at+mipsend=?
ERROR
at+mipsend?
+MIPSEND: 1 1500 2 1500
OK
4.15.2.6
+MIPPUSH, Push Data into Protocol Stack
This command causes the g20 to push the data accumulated in its accumulating buffers into the protocol stack. It is assumed
that before using this command, some data should exist due to previous +MIPSEND commands.
Set Command
Command
+MIPPUSH = <Socket ID>
254
Description
//1500 - 2 chars 'aa' = 1498
//Sockets 1 and 2 were opened using + MIPOPEN AT command
Response/Action
+MIPPUSH: <Socket ID>
OK
or:
ERROR
or:
+MIPPUSH: <err>
98-08901C68-O
Advertisement
Table of Contents
