Table of Contents
Advertisement
AT
Command
+MCWAKE
This command requests reports on the status of the GPRS coverage.
+MDBAD
This command sets/reads the auto-delete user preference setting in the date book
database.
+MDBL
This command locks/unlocks the date book database.
+MDBR
This command reads entries stored in the date book.
+MEGA
This command updates the Email Gateway Address, and is required for all MAs.
+MHIG
This command enables an intelligent car kit to indicate the ignition state of the
vehicle to the g20, which enables the g20 to turn on and off with the ignition, or to
enter a power saving state when the ignition is turned off.
+MIPCALL
This command creates a wireless PPP connection with the GGSN, and returns a
valid dynamic IP for the g20.
+MIPCLOSE
This command causes the g20 module to free the socket accumulating buffer and
disconnect the g20 from a remote side.
+MIPFLUSH
This command causes the g20 module to flush (delete) data accumulated in its
accumulating buffers.
+MIPOPEN
This command causes the g20 module to initialize a new socket and open a
connection with a remote side.
+MIPPUSH
This command causes the g20 module to push the data accumulated in its
accumulating buffers into the protocol stack.
+MIPRCV
This command causes the g20 to send unsolicited events to the DRT when it detects
that data has arrived on the protocol stack.
+MIPSEND
This command causes the g20 to transmit the data that the terminal provides, using
an existing protocol stack.
+MIPSETS
This command causes the g20 to set a watermark in the accumulating buffer. When
the watermark is reached, data is pushed from the accumulating buffer into the
protocol stack.
+MIPSTAT
This command sends an unsolicited event to the terminal indicating a change in link
status.
+MIPXOFF
An unsolicited event that the g20 sends to the terminal to stop sending data.
+MIPXON
An unsolicited event that the g20 sends to the terminal when the g20 has free
memory in the accumulating buffer.
+MKPD
This command enables accessories to control the press and release of key presses.
98-08901C68-O
Table 137. AT Commands (Alphabetical) (Continued)
Description
Reference Tables
Page
156
114
111
112
123
202
246
250
255
248
254
257
253
251
257
258
258
206
311
Advertisement
Table of Contents
