Table of Contents
Advertisement
AT Commands Reference
Table 105. +CGDCONT Parameters (Continued)
<Parameter>
<APN>
String parameter, which is a logical name that is used to
select the GGSN or the external packet data network.
(Access Point
Name)
If the value is null or omitted, the subscription value is
requested.
<PDP_address>
String parameter, which identifies the MT in the address
space applicable to the PDP.
If the value is null or omitted, a value may be provided by
the terminal during the PDP startup procedure or, failing
that, a dynamic address is requested.
The Read form of the command continues to return the null
string even if an address has been allocated during the
PDP startup procedure. The allocated address may be
read using the +CGPADDR command.
The default value is 0.
<d_comp>
Numeric parameter that controls PDP data compression.
0
1
Other values are reserved.
The default value is 0.
<h_comp>
Numeric parameter that controls the PDP header
compression.
0
1
Other values are reserved.
Note: Currently, only one data compression algorithm
(V.42bis) is provided in SNDCP. If and when other
algorithms become available, a command will be provided
to select one or more data compression algorithms.
The default value is 0.
<pd1>,...<pdN>
Zero to N string parameters whose meanings are specific
to the <PDP_type>.
For PDP type OSP:IHOSS the following parameters are
defined:
<pd1>
<pd2>
<pd3>
The default is 0.
214
Description
OFF
ON
OFF
ON
<host>
Fully formed domain name, or
extended hostname of the Internet
host.
<port>
TCP or UDP port on the Internet
host.
<protocol>
Protocol to be used over IP on the
Internet - "TCP" or "UDP".
98-08901C68-O
Advertisement
Table of Contents
